OVERVIEW: Fines: Drum Frame with 200mm Screens Mid Product: Fully Welded Drums with 450mm Openings Oversize Up to 32” (800mm ), Output of up to 500 Tonnes per Hour. HOPPER AND FEEDER Feed hopper capacity – 16.5yd3 (12.6m3) Mechanism – Hydraulic variable speed drive via hydraulic cylinder Feeder – Reciprocating plate feeder fitted directly under feed hopper. Plate width & Speed – 3ft 1 inch (940 mm), 8 Strokes per minute. WEIGHT & WORKING DIMENSIONS Weight – 48 tons approximately Length – 68ft 10in (20.9 metres) Width – 24ft 10in (7.6 metres) Height – 16ft 5in (5 metres) TROMMEL DRUM Diameter & Length – Internal 5ft (1.5m), 20ft (5.5m) Incline angle – 5 degrees Fines – 200 mm Screens installed Mid Product – 450mm Fully Welded Drum POWER UNIT & CONTROLS This Unit is powered by CAT4.4 96 kW (128.7 HP) Diesel Engine Electronic Control System Digital Control Panel with Control Features and Diagnostics Fines Conveyor – 1200mm (3ft 11in) wide heavy duty belt, feeding to the rear of the machine. – Output height 12ft 8in – Single hub Hydraulic Drive Mid Product Conveyor – 1000mm (3ft 3in) wide heavy duty belt, feeding to the side of the machine. – Output height 11ft 4in – Single hub drive. Oversize Conveyor – 1200mm (3ft 11in) wide heavy duty belt, feeding to the front of the machine. – Output height 12ft 5in – Single hub Hydraulic Drive Second recycling drum included 1.5m 125mm opening and 4m 40mm openings
ID:7036Published:03 May, 2024Last Update:03 May, 2024
